I2C Protocol Analyzer
I2C stands for Inter-IC-Communications bus. It is a 2 wire synchronous serial bus standard, originally designed for on-board communications between ICs. It has been used for some off-board applications as well (like interacting with your Computer Monitor). It was designed by Phillips Semiconductors (now NXP.)
The I2C Protocol Analyzer is one of many signal decoders included with all DigiView Logic Analyzers.
The DigiView software provides extensive navigation, search, measurement, export, plot and printing capabilities to all signal types. The I2C Protocol Analyzer adds I2C specific decoding and configuration options.
We fully support the I2C specification
- Standard, Fast, Fast+, High-speed and Ultra Fast Modes
- 7bit and 10bit addressing
- START bytes
- Repeated START
- General calls
- Reserved addresses
Configuration options include:
- Glitch Filter (0 - 50ns)
- 7 Bit Address Decode as 7bit + R/W
- 7 Bit Address Decode as raw 8bit
- Invert Clock (SCL), Data (SDA) or Both
- Auto adapts to clock speed
Demo Video
Help Video
I2C Bus
More information
PO Box 2408
Rowlett, TX 75030-2408
Rowlett, TX 75030-2408
voice: 972-272-9392
FAX: 972-494-5814
FAX: 972-494-5814
Copyright © 2022 TechTools. • TechTools, DigiView, ACM, ClearView, CVASM, EconoROM, FlexROM, QuickLoader, QuickWriter, TDE and UniROM are trademarks of TechTools, P.O. Box 2408 Rowlett, Texas 75030-2408 • PIC and PICmicro are registered trademarks of Microchip Technology Inc.
Continued use of this website indicates your acceptance of our Policies, including Terms of Use and Privacy.