| |
 |
In Circuit Emulator Modules
ClearView Mathias In-Circuit Emulator Modules.
Family and
Member modules for the ClearView Mathias emulate the 12, 14 and 16 series
PICmicro® MCU. Optional modules for Timing and Execution Trace (with
Timing) also available. |
|
Mathias Modules from: $50.00 to
$270.00 |
Family Modules (1 required)
| Part Number: |
Description: |
Price: |
| CVM04F |
ADVANCED 14 BIT FAMILY MODULE WITH DATA BREAKPOINTS (CVM03F COMPATIBLE) |
$200.00 |
14 bit Member Modules (use with
CVM03F or
CVMXXF)
| Part Number: |
Description: |
Price: |
| CVM62XM |
62X MEMBER MODULE |
$100.00 |
| CVM77M Rev C |
Member Module, 62B,63A,65B,72A,73B,74B,66,67,76,77, (712/716 with ADP716 adaptor) |
$200.00 |
| CVMF84M |
16F84 Member module (10MHz) |
$100.00 |
| CVM55XM |
554,556,558 MEMBER MODULE |
$100.00 |
| CVM711M |
710,711 MEMBER MODULE |
$100.00 |
| CVM715M |
715 MEMBER MODULE |
$100.00 |
| CVM871M |
16F870/871 Member Module |
$200.00 |
| CVMF77M |
16F77 Member Module |
$200.00 |
| CVMF84AM |
16F84A Member module (20MHz) |
$150.00 |
| CVM001M |
'55X,62X,CE62X member module |
$200.00 |
| CVM66XM |
MEMBER MODULE, 16C641/642/661/662 |
$200.00 |
| CVM87XAM |
16F870A-877A Member Module |
$200.00 |
14 bit Member Modules (use with
CVM03F only)
| Part Number: |
Description: |
Price: |
| CVM67XM |
12C67X and 12CE67X module |
$100.00 |
| CVM77XM |
MATHIAS MEMBER MODULE, 77X |
$200.00 |
12 bit Member Modules (use with
CVM5XF)
| Part Number: |
Description: |
Price: |
| CVM50XM |
12C508/509 member module |
$75.00 |
| CVM5XXM |
16C505,12C50X,12CE51X MEMBER MODULE |
$100.00 |
Optional Items
| Part Number: |
Description: |
Price: |
| CVMT1 |
TIMING/COUNTER MODULE |
$130.00 |
| ADP40P |
PIC ADAPTER, DIP40 TO PLCC44 (WITH RIGID PLCC PLUG) |
$109.00 |
| ADP716 |
16C712/716 adaptor for CVM77M (>=Rev C) |
$35.00 |
Replacement Items
| Part Number: |
Description: |
Price: |
| C40D-4 |
Mathias cable, 40 pin - .600 DIP,4inch |
$15.00 |
| C28D-4 |
Mathias cable, 28 pin - .600 DIP,4inch |
$15.00 |
| C18ND-4 |
Mathias cable, 18 pin - .300 DIP,4inch |
$15.00 |
| C8ND-4 |
IDC to 8 pin DIP (.300) - 4 inch |
$15.00 |
| C28ND-4 |
Mathias cable, 28 pin - .300 DIP,4inch |
$15.00 |
| CVM-MN8 |
TECHTOOLS MANUAL |
$30.00 |
| PS-CVM* |
Power Supply, Mathias |
$15.00 |
* NOTE: Power supply rated for 120 VAC, 60Hz input
Upgrades
| Part Number: |
Description: |
Price: |
| CVM-FWL |
FIRMWARE/LOGIC UPGRADE |
$55.00 |
|
|
|
TechTools Programmer
QuickWriter™
QuickWriter™ MCU Programmer
supports most all currently released 12bit, 14bit and 18(F) series
PICmicro® MCU microcontrollers (10F, 12C, 12F, 14C, 16C, 16F & 18F
series). |
|
QuickWriter™ & Software:
$199.00 |
QuickWriter™ MCU Programmer
| Part Number: |
Description: |
Price: |
| QW1 |
QUICKWRITER MCU PROGRAMMER |
$199.00 |
New 4 position GANG Adapters
| Part Number: |
Description: |
Price: |
| QW-4ZIF40/28 |
QUICKWRITER GANG ADAPTER 28 AND 40 PIN 14 &16 BIT DEV. |
$199.00 |
| QW-4PLCC44 |
QUICKWRITER GANG ADAPTER PLCC 44 DEVICE |
$199.00 |
| QW-4SOIC28 |
QUICKWRITER GANG ADAPTER 28PIN SOIC 14 AND 16 BIT DEV. |
$249.00 |
| QW-4SSOP28 |
QUICKWRITER GANG ADAPTER 28 PIN SSOP 14&16 BIT DEV. |
$249.00 |
| QW-4ZIF18 |
QUICKWRITER GANG ADAPTER 18 PIN DIP 14 AND 16 BIT DEV. |
$199.00 |
| QW-4SOIC18 |
QUICKWRITER GANG ADAPTER 18 PIN SOIC 14 AND 16 BIT DEV. |
$249.00 |
| QW-4SSOP20 |
QUICKWRITER GANG ADAPTER 20 PIN SSOP 14 AND 16 BIT DEV. |
$249.00 |
| QW-4SO8/14N |
QUICKWRITER GANG ADAPTER 8 & 14 PIN SOIC NARROW |
$249.00 |
| QW-4SO8/14W |
QUICKWRITER GANG ADAPTER 8 & 14 PIN SOIC WIDE |
$249.00 |
Single position Adapters
Replacement Items
| Part Number: |
Description: |
Price: |
| CBL-ICSP |
QuickWriter In-Circuit-Serial-Programming cable |
$15.00 |
| PS-QW1* |
Power Supply, QuickWriter |
$15.00 |
* NOTE: Power supply rated for 120 VAC, 60Hz input
|
|
|
TechTools EconoROM™
III
Economical Emulator designed for quick firmware test cycles.
If you just want to stop the "burn/insert/test/remove/erase" cycle, then this
is the tool for you. |
|
From $179.00 |
EconoROM™ III Emulators
| Part Number: |
Description: |
Price: |
| ER3-256 |
ECONOROM III,256Kbit,32Kx8,45n |
$179.00 |
| ER3-512 |
ECONOROM III,512Kbit,64Kx8,45n |
$239.00 |
| ER3-1M |
ECONOROM III,1Mbit,128Kx8,45ns |
$299.00 |
| ER3-4M |
ECONOROM III,4Mbit,512Kx8,45ns |
$399.00 |
| ER3-8M |
ECONOROM III,8Mbit,1024Kx8,45n |
$499.00 |
Optional Items
| Part Number: |
Description: |
Price: |
| ADP16 |
ADAPTER, 2 - 8 BIT EMULATORS TO A 40PIN DIP |
$69.00 |
| CBL08-25 |
25 Ft DOWNLOAD CABLE UPGRADE |
$10.00 |
| PRN01 |
PRINTER CARD, LPT1/2/3 CONFIG. |
$19.00 |
| ADP32-BP |
ADAPTER, DIP32 TO PLCC32 WITH RIGID BACKING PLUG |
$109.00 |
| ADP28-BP |
ADAPTER, DIP28 TO PLCC32 WITH RIGID BACKING PLUG |
$109.00 |
| PS-RT1* |
POWER SUPPLY, ER3,FR3 |
$25.00 |
* NOTE: Power supply rated for 120 VAC, 60Hz input
Replacement Items
| Part Number: |
Description: |
Price: |
| C28D-6 |
TARGET CABLE,28 PIN DIP, 6 inch |
$15.00 |
| C32D-6 |
TARGET CABLE,32 PIN DIP, 6 inch |
$15.00 |
|
|
|
TechTools FlexROM™
III
Fast FLASH and EPROM emulator loads at 2.5 Mbit per second,
and includes advanced hardware features such as: Host and Target read/write
access, Address SnapShot circuit, Address Trigger circuit, user control lines,
user status lines, staus line latching on trigger, auto/manual Target reset,
auto cycle-interleaving and more. |
|
From $399.00 |
FlexROM™ III Emulator Base UnitNote: Base unit requires at least one ACM™ target
interface (listed below).
| Part Number: |
Description: |
Price: |
| FR3-1M |
FlexROM III,1Mbit,128Kx8,45ns |
$279.00 |
| FR3-4M |
FlexROM III,4Mbit,512Kx8,45ns |
$379.00 |
| FR3-8M |
FlexROM III,8Mbit,1Mx8,45ns |
$529.00 |
| FR3-16M |
FlexROM III,16Mbit,2Mx8,45ns |
$679.00 |
| FR3-32M |
FlexROM III,32Mbit,4Mx8,45ns |
$799.00 |
| FR3-64M |
FlexROM III,64Mbit,8Mx8,45ns |
$999.00 |
| FR3-128M |
FlexROM III,128Mbit,16Mx8,45ns |
$1399.00 |
| FR3-256M |
FlexROM III,256Mbit,32Mx8,45ns |
$2399.00 |
Active Cable Module (ACM™)Note: At least one ACM™ target interface is required
for each base unit.
| Part Number: |
Description: |
Price: |
| ACM-8 |
FR3 Active Cable Module, 8bit |
$120.00 |
| ACM-16 |
FR3 Active Cable Module, 16bit |
$120.00 |
| ACM-2X8 |
FR3 Active Cable Module, dual 8 bit |
$150.00 |
| ACM-C |
FR3 Active Cable Module, dual 50 pin cables w/gnds |
$150.00 |
Optional Items
| Part Number: |
Description: |
Price: |
| ADP40-BP |
ADAPTER, DIP40 TO PLCC44 WITH RIGID BACKING PLUG |
$109.00 |
| CBL08-25 |
25 Ft DOWNLOAD CABLE UPGRADE |
$10.00 |
| PRN01 |
PRINTER CARD, LPT1/2/3 CONFIG. |
$19.00 |
| ADP32-BP |
ADAPTER, DIP32 TO PLCC32 WITH RIGID BACKING PLUG |
$109.00 |
| ADP28-BP |
ADAPTER, DIP28 TO PLCC32 WITH RIGID BACKING PLUG |
$109.00 |
| PS-RT1* |
POWER SUPPLY, ER3,FR3 |
$25.00 |
* NOTE: Power supply rated for 120 VAC, 60Hz input
Replacement Items
| Part Number: |
Description: |
Price: |
| C40D-6 |
TARGET CABLE, 40 PIN, 6 inch |
$15.00 |
| C28D-6 |
TARGET CABLE,28 PIN DIP, 6 inch |
$15.00 |
| C32D-6 |
TARGET CABLE,32 PIN DIP, 6 inch |
$15.00 |
|
|
|
TechTools DigiView™ Logic
Analyzer
Choose from our economical 18 channel, 100 MHz Logic
Analyzer or our advanced 18/36 channel 200/400 MHz model. All models use
automatic real-time hardware compression. |
|
From $499.00 |
DigiView™ Logic Analyzer
| Part
Number: |
Description: |
Price: |
| DV1-100 |
DigiView 18 Channel, 100MHz Logic Analyzer |
$499.00 |
| DV3400 |
DigiView 18/36 Channel, 200/400MHz Logic
Analyzer |
$1499.00 |
| CBL-DV1 |
*No longer available - USE CBL-DVB BELOW*
This is the original cable shipped with DV1-100 manufactured prior to July,
2007. This cable was side stackable but not end stackable (.100x.140) and
required the round style clips (CLIP2-10) |
--- |
| CBL-DVB |
Replacement cable (RevB) for all DV1-100 models.
Fits older round style clips as well as newer flat style (CLIP3-10).
This cable is side and end stackable (.098x.098). |
$30.00 |
| CBL-DV3 |
Replacement cable for all DV3400 models.
Fits older round style clips as well as newer flat style (CLIP3-10).
This cable is side and end stackable (.098x.098). |
$35.00 |
CLIP2-10
Round Style |
|
*No longer stocked*
This is the original
ROUND STYLE clip shipped with DV1-100 manufactured prior to July 2007. Although
we no longer stock this item, a compatible part is available from several
sources.
Part Number:
Pomona 5360-0
Sources:
www.Digi-key.com,
www.mouser.com,
www.newark.com
More Sources:
www.pomonaelectronics.com/index.php?i=wtb |
--- |
CLIP3-10
Flat Style |
|
Replacement micro-grabber clips, pkg of 10
FLAT STYLE. Fits both CBL-DVB and CBL-DV3 cables. DOES NOT FIT OLDER
DV1-100 cables shipped with round style clips. |
$35.00 |
| |
NOTE:
If you have a DV1-100 that came
with ROUND STYLE clips, then you must purchase similar round style replacement
clips (see sources in the CLIP2-10 section above). The FLAT STYLE (CLIP3-10)
will NOT make good contact with the older cables. Alternatively, you could
replace your old cables with new (CBL-DVB) cables. Then you can use your
existing round clips as well as our current flat style clips (CLIP3-10). |
|
|
|
DigiView Logic Analyzer